Line Card

CNC Milling

  • Mighty Comet HB-120 W Machining Center; 82.7”x59” table, 78.7” between columns; 40-3800 rpm
  • 2 Haas VF-10 Machining Center 32”x120”, 15,000 rpm
  • 1 Haas VF-3ss 20”x40”, 12,000 rpm
  • 2 Viper Machining Centers V-2030 30”x80”, 6,000 rpm V-1500 30”x60”, 8,000 rpm
  • YCM NSV-102A 20”x40”, 15,000 rpm

CNC Turning

  • Mori Seiki NLX 2500SY
  • Main Chuck Size 10”
  • Max turning 14.4”
  • Sub Spindle Chuck 6”
  • Turning length 28”
  • Spindle bore 3.11”
  • 4,000 rpm

Milling Machine

  • Hurco
    Table Size 9”x49”
  • 2 Bridgeports
    Table Size 10”x 49”

Fabrication

  • 165-Ton Hydraulic Press Brake – 12’
  • 165-Ton Hydraulic Press Brake – 24’ (Broussard)
  • Tube bending – capacity 3”
  • Mig Welder
  • Tig Welder
  • Iron Worker and Punch
  • Punch Press

Paint Booth

  • 14’ Wide x 22’ deep x 8’ high with capacity up to 14’ high
  • 2 Gal & Quart cup pressure pot, HLVP spray
  • Latex capable with airless:
    Enamels – Lacquers
    Poly’s – Polane
    Themel

Heavy Plate Saw

  • Tysman 16” thick cutting area 24’ long

CTL Line Capabilities

  • Leveler CTL 60’ wide x 40’ length
  • Thickness .020-.156

Band Saw Cutting

  • Doall Circle Saw – cuts up to 16” thick
  • Hem Saw – cuts up to 16” diameter (VA)
  • Hem Saw – cuts up to 20” diameter

Acra Cut

  • Schelling-cutting area 14’ width x 20’ length
  • Schelling-cutting area 14’ width x 156” length
  • Schelling-cutting area 6’ width x 165” length
  • Schelling-cutting area 14’ width x 168” length
  • Up to 8” thick

Cut Off Saw

  • Eisele Saw - 6” diameter
    Cutting area 6” x 9” max
  • Behringer – 4.5” diameter
  • Soco – 3” diameter
  • Mooney Saw – 5.9” Round, 5.5” Square, Rectangles vary from 4” x 10” to .375” x 14”

Shearing

  • Shear .016 - .188 all materials
  • Shear – up to .250 all materials
    Ability to cut up to 12’

Finishing

  • Timesaver F100 polishing w/ sand paper
    Stocking grit 80/120/150/220/400 brushed/polished

Deburring

  • Tumbler Finisher
  • 20” x 70” – 16” deep

Multicam Router (1)

  • Table size - 7’ x 12’
  • 16” Z axis 8” standard clearance
  • T-Slot Table

Multicam Router (2)

  • Table size – 12’ x 30’
  • 8” Z axis 4” standard clearance
  • Air hold down table
  • One of the LARGEST tables on the East Coast!

Water Jet Cutting

  • 10’x 20’ table, 5’x 12’ table AND 10’x26’ table (NEW!)
  • 94,000 PSI
  • 2” thick aluminum capacity